10-24
Troubleshooting > Troubleshooting
R
Message
Checkpoints
Corrective Actions
Reference
Page
RAM disk error.
―
An error has occurred on the RAM
disk. Job is canceled. Select [
End
].
The possible error codes and their
descriptions are as follows.
04: Insufficient space on the RAM disk.
If the optional RAM dis is installed,
increase the RAM disk size by changing
RAM Disk Setting in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [
Printer
Priority
] in Optional Memory.
USB drive error.
Is writing to a USB drive prohibited?
An error occurred in the USB drive.
The job stopped. Select [
End
].
The possible error codes and their
descriptions are as follows.
01: Connect a USB drive that can
be written to.
―
―
An error occurred in the USB drive.
The job stopped. Select [
End
].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, the USB drive is not
compatible with the machine. Use
the USB drive formatted by this
machine. If the USB drive cannot be
formatted, it is damaged. Connect a
compatible USB drive.
―
USB Drive is full.
*1
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
―
Job is canceled. Select [
End
].
Insufficient free space in the USB
drive. Delete unnecessary files.
―
Remove originals in the
document processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals and
press [Continue].
—
Remove originals from the document
processor, put them back in their
original order, and place them again.
Select [
Continue
] to resume printing.
Select [
Cancel
] to cancel the job.
—
Replace MK.
—
Replacement of the parts in the
maintenance kit is necessary at every
500,000 pages of printing and
requires professional servicing.
Contact your Service Representative.
—
Running security
function...
—
Running security function. Please
wait.
—
Summary of Contents for ECOSYS M3860idn
