Kyocera Ecosys M812cidn Operation Manual Download

Page: 230 / 526

5-27

Operation on the Machine > Destination Operations

Destination Operations

This section explains how to select and confirm the destination.

In addition to direct entry, destination information can also be selected using the methods below.

• Choosing from the Address Book

Choosing from the Address Book (5-27)

• Choosing from the External Address Book

Choosing from the External Address Book (5-29)

• Choosing from the One Touch Key

Choosing from the One Touch Key (5-29)

• Choosing from the Speed Dial

Choosing from the Speed Dial (5-30)

• Choosing from the FAX

FAX Operation Guide

Choosing from the Address Book

Select a destination registered in the Address Book.

In the basic screen for sending, select [Address Book].

NOTE

• You can set the machine up so that the address book screen appears when you select the [Send] key.

[Default Screen] (8-11)

• If you are using the products equipped with the fax function, you can specify the fax destination. Enter the

other party number using the numeric keypad.

NOTE

For more information about how to register destinations in the Address Book, refer to the following:

Adding a Destination (3-32)

NOTE

For details on the External Address Book, refer to the following:

Command Center RX User Guide

Summary of Contents for Ecosys M812cidn















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Ecosys M812cidn

Reviews:

Related manuals for Ecosys M812cidn

Brands by name

Popular brands

Kyocera Ecosys M812cidn, Operation Manual

Search results

Summary of Contents for Ecosys M812cidn

Reviews:

Related manuals for Ecosys M812cidn

Brands by name

Popular brands