2-12
Installing and Setting up the Machine > Setting Date and Time
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
1
Display the screen.
[System Menu / Counter] key > [Date/Timer/Energy Saver]
2
Configure the settings.
Select and set in the order [Time Zone] > [Date/Time] > [Date Format]
NOTE
To make changes after this initial configuration, refer to the following:
[Date/Timer/Energy Saver] (8-58)
The correct time can be periodically set by obtaining the time from the network time server.
Command Center RX User Guide
Item
Description
Time Zone
Set the time difference from GMT. Choose the nearest listed location from
the list. If you select a region that utilizes summer time, configure settings
for summer time.
Date/Time
Set the date and time for the location where you use the machine. If you
perform Send as E-mail, the date and time set here will be displayed on
the header.
Value
: Year (2000 to 2037), Month (1 to 12), Day (1 to 31),
Hour (00 to 23), Minute (00 to 59), Second (00 to 59)
Date Format
Select the display format of year, month, and date. The year is displayed
in Western notation.
Value
: Month/Day/Year, Day/Month/Year, Year/Month/Day
Summary of Contents for Ecosys M812cidn
