8-14
Fax Settings > Default FAX settings
Encryption Key Registration
[System Menu/Counter]
key > [
Function Settings
] >
[Fax/iFax]
>
[Encryption Key Registration]
This is used to register an encryption key for encrypted communication.
Fax Communication Restriction
[System Menu/Counter]
key > [
Function Settings
] >
[Fax/iFax]
>
[Fax Communication Restriction]
This function allows you to send or receive originals only when communication requirements are met.
Transmission Restriction (page 8-18)
Sound
[System Menu/Counter]
key > [
Function Settings
] >
[Fax/iFax]
>
[Sound]
Port 1/
Port
2
*1
RX Start Speed
Change the RX Start Speed.
When communication conditions are bad, the fax may not be received correctly. In
that case, set a lower RX Start Speed.
Value
: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
ECM RX
Set whether ECM RX is performed.
ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax machines
that have ECM mode check for errors as they communicate, preventing distortion of
the image due to noise on the line and other conditions.
Value
: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than
when [
Off
] is selected.
Others RX Setting
Select the reception mode.
Value:
Auto (Normal), Auto (Fax/Phone), Auto (TAD), Auto (DRD), Manual RX
If Auto (DRD) is selected, select the DRD Pattern.
Value
: Pattern 1 (Normal Ring), Pattern 2 (Double Ring),
Pattern 3 (Short-Short-Long), Pattern 4 (Short-Long-Short)
DRD reception mode is available for some countries.
FAX Reception (page 4-2)
Manual Reception (page 4-4)
DRD Reception (Available for some countries.) (page 5-46)
Remote SW Dial
To start fax reception by operation from the connected telephone set, use the following
operation.
Value
: 00 - 99
Remote Switch Function (page 5-50)
Encrypted
Reception
Turns on reception by encrypted communication.
Value
: Off, On
If turned on, select the encryption key.
Reception Port
You can make one of the 2 phone lines a receive-only line.
Value
: Off, Port 1, Port 2
Reception Port Selection (page 9-3)
*1 This function is displayed when 2 optional FAX Kits (Dual FAX option) are installed.
Item
Description
Summary of Contents for FAX System 10
