background image

5JR

1-3-20

U641

Setting communication time 2

Description

Sets the time-out time for fax transmission.

Purpose

To improve transmission performance for international communications mainly.

Method

1. Press the start key.
2. Select the item to be set.

Setting the T0 time-out time

Sets the time before detecting a CED or DIS signal after a dialing signal is sent.
Depending on the quality of the exchange, or when the auto select function is selected at the 
destination unit, a line can be disconnected. Change the setting to prevent this problem.

1. Change the setting using the cursor left/right keys.

2. Press the start key. The value is set.

Setting the T1 time-out time

Sets the time before receiving the correct signal after call reception. No change is necessary for 
this maintenance item.

1. Change the setting using the cursor left/right keys.

2. Press the start key. The value is set.

Item No.

Description

Display

Description

T0 Time Out

Sets the T0 time-out time.

T1 Time Out

Sets the T1 time-out time.

T2 Time Out

Sets the T2 time-out time.

Ta Time Out

Sets the Ta time-out time.

Tb1 Time Out

Sets the Tb1 time-out time.

Tb2 Time Out

Sets the Tb2 time-out time.

Tc Time Out

Sets the Tc time-out time.

Td Time Out

Sets the Td time-out time.

Description

Setting range

Initial setting

T0 time-out time

30 to 90 s

56

Description

Setting range

Initial setting

T1 time-out time

30 to 90 s

36

Summary of Contents for Fax System (U)







































































Reviews: