16
Corrective Action for Paper Jam
Indicator
A
B
C
D
E
F
G
H
I
1 to 6
Corrective Action
A paper jam has occurred in the optional feeder.
Carefully pull out the jammed paper. (For details, read
the EF-1/UF-1 instruction manual.)
A paper jam has occurred in the MP (multi-purpose)
tray. Carefully pull out the jammed paper. Then open
and close the front cover of the printer once.
Open the side cover of the paper feeder indicated and
remove the jammed paper. (Refer to the example on the
next page.)
Remove the paper jammed in the paper stacker. (For
details, read the DF-30/DF-31/SO-30/ST-30 instruction
manual.)
Paper is jammed before being completely output. Open
the side cover of the printer and carefully remove the
jammed sheet. (For details, read the printer ’s instruction
manual.)
If printing stops before a sheet is completely output,
carefully remove that sheet.
Open the front cover and carefully pull out the paper
feed unit as far as it will go. If paper is jammed in the
registration rollers, remove it by pulling out in the
direction where this is most easily accomplished. (For
details, read the printer ’s instruction manual.)
If paper is jammed in the fuser unit, remove the paper in
the same manner. (For details, read the printer’s
instruction manual.)
After all paper has been completely removed, return the
paper feed unit to its original folded down position.
Open the front cover and carefully pull out the paper
feed unit as far as it will go. Open the fuser unit cover
(hold the [green] knob), and check the interior of the
fuser unit. Paper may remain trapped inside the fuser
unit.
Open the front cover, pull out the duplexer and remove
the jammed paper. (For details, read the following
pages.)
Pull out the paper feed cassette indicated and remove the
jammed paper. After all paper has been completely
removed, open and close the front cover once.
Meaning of Indicator
Check the optional paper
feeder (EF-1 or UF-1). (Only
when installed)
Check the printer’s MP
(multi-purpose) tray.
Check the paper feeder
(main unit).
(D and E are only displayed
when an optional PF-30 is
installed.)
Check the optional unit
(DF-30/DF-31/SO-30/ST-
30). (Only when installed)
Check the printer’s face-up
output tray.
(connection with optional
unit)
Check the printer’s face-
down output tray.
Check the printer’s paper
feed unit.
Check the printer’s fuser
unit.
Check the optional duplexer
(DU-31 [this unit]).
Check the paper feed
cassette indicated.
