Page 1 - 11
Kyocera
Classic
Universal Printer Driver
Tips, hints, and issues
Before you start using the Kyocera
Classic
Universal Driver you should study this document
to learn some specific issues of this driver.
Properties
Tab: Extended Settings
After installing the driver you have the choice to set-up the finisher of the print driver.
You can set-up the print driver with the finisher
options you like to use or the user should use
only.
In addition you have the possibility to set-up the
finisher options of the print driver using the ‘Auto
Configuration Feature’. To do so click the button
‘Set-up’. You will see a new Window. For more
information see below.
After auto configuration of the print driver you
have the possibility to deselect finisher options
which are not needed.
‘Watermark’ is an additional selectable feature.
‘Auto Configuration’ ask you for the IP address /
Host name, SNMP community name, and the
SNMP time-out. If all values are correct click
‘OK’. The print driver will query the printer if
possible and set-up the settings of the finisher
tab only.
