18
3.3.7.1 Cut Mode
“Standard Cut” enables the roll paper to be cut in a given standard size.
“Synchro Cut” enables the roll paper to be cut in an appropriate size to fit the image length.
Press the
L1
Key repeatedly for either of them.
Press the
Enter
Key to apply the setting.
3.3.7.2 Paper Width/Media Setting
To specify the media width and type, press the
R1
Key to enter Width/Media Setting.
For “Roll Deck 1”, press the
L1
Key repeatedly for the media width, press
R1
Key for media
type.
For “Roll Deck 2”, press the
L2
Key repeatedly for the media width, press
R2
Key for media
type.
For “Bypass Tray”, press the
L3
Key repeatedly for the media width, press
R3
Key the
media type.
The following Media Width settings can be specified for roll papers.
DIN: 36”, A0, A1, A2, A3
ENG: 36”, 34”, 22”, 17”, 11”
ARCH: 36”, 30”, 24”, 18”, 12”
The following Media Width settings for “Bypass Tray” are provided.
DIN: 36”, A0, A1, A2, A3
ENG: 36”, 34”, 22”, 17”, 11”, 8.5”
ARCH: 36”, 30”, 24”, 18”, 12”, 9”
The following Media Type settings are provided.
•
Plain
•
Vellum
•
Film
Press the
Enter
Key to apply the setting.
