Default Setting (System Menu)
8-98
OPERATION GUIDE
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to
Restarting the System on page 8-88
.
IPSec Setting
Sets up IPSec. The default setting is
Off
. Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network Security
, and
then [Change] of
IPSec
.
NOTE:
If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to login with administrator privileges.
Refer to
Adding a User on page 11-4
for the default
login user name and password.
3
Press [On].
4
Press [OK].
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to
Restarting the System on page 8-88
.
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is
Auto
. Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
and then
[Change] of
LAN Interface
.
3
Select [Auto], [10BASE-T Half], [10BASE-T Full],
[100BASE-TX Half] or [100BASE-TX Full] as the
LAN interface.
System - LAN Interface
Select the LAN Interface type.
10BASE-T
Half
Auto
10BASE-T
Full
100BASE-TX
Half
100BASE-TX
Full
Status
10/10/2008 10:10
Cancel
OK
Summary of Contents for TASKalfa 250ci
