Kyocera TASKalfa 3011i Operation Manual Download

Page: 198 / 607

5-6

Operation on the Machine > Loading Paper in the Multipurpose Tray

Loading Paper in the Multipurpose Tray

For details of the supported paper sizes, refer to the following:

Choosing the Appropriate Paper (page 11-13)

For the paper type setting, refer to the following:

Media Type Setting (page 8-15)

Be sure to use the multipurpose tray when you print on any special paper.

The capacity of the multipurpose tray is as follows.

• A4 or smaller plain paper (80 g/m

), recycled paper or color paper: 100 sheets

• Plain paper (80 g/m

), recycled paper or color paper larger than A4: 25 sheets

• Thick paper (250 g/m

): 10 sheets

• Thick paper (209 g/m

): 10 sheets

• Thick paper (157 g/m

): 10 sheets

• Thick paper (120 g/m

): 25 sheets

• Thick paper (104.7 g/m

): 25 sheets

• Hagaki (Cardstock): 20 sheets
• Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2:

5 sheets

• OHP film: 10 sheet

Open the multipurpose tray.

IMPORTANT

• If you are using a paper weight of 106 g/m

or more, set the media type to Thick and set the weight of the

paper you are using.

• Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner tray may

cause a paper jam.

NOTE

• When you load custom size paper, enter the paper size by referring to the following:

Original / Paper Settings (page 8-11)

• When you use special paper such as transparencies or thick paper, select the media type by referring to the

following:

MP Tray Setting (page 8-8)

• Paper size can be automatically detected and selected, refer to the following:

Paper Selection (page 6-19)
MP Tray Setting (page 8-8)

Summary of Contents for TASKalfa 3011i
































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands

Kyocera TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands