Kyocera TASKalfa 3011i Operation Manual Download

Page: 215 / 607

5-23

Operation on the Machine > Sending Document to Desired Shared Folder on a Computer (Scan to PC)

Sending Document to Desired Shared

Folder on a Computer (Scan to PC)

You can store the scanned document into the desired shared folder on a computer.

Configuring Settings before Sending

Before sending a document, configure the following settings.

• Make a note of the computer name and full computer name

• Make a note of the user name and domain name

• Create a shared folder and make a note of a shared folder

• Configure the Windows firewall

Sending Document to Desired Shared Folder on a

Computer

When transmitting using wireless LAN, select the interface dedicated to the send function in advance.

Primary Network (Client) (page 8-60)

[Home] key > [Send]

Place the originals.

In the basic screen for sending, select [Folder Path Entry].

Enter the destination information.

Select [

SMB

Making a note of the computer name and full computer name (page 3-12)

Making a note of the user name and domain name (page 3-13)

Creating a Shared Folder, Making a Note of a Shared Folder (page 3-14)

Configuring Windows Firewall (page 3-17)

Loading Originals (page 5-2)

Summary of Contents for TASKalfa 3011i
































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands

Kyocera TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands