Kyocera TASKalfa 3011i Operation Manual Download

Page: 258 / 607

5-66

Operation on the Machine > Operating using Removable USB Memory

Saving Documents to USB Memory (Scan to USB)

You can store scanned documents to a removal USB memory.

Place the originals.

Plug the USB memory.

Plug the USB memory into the USB Memory Slot.

When the machine reads the USB memory, "Removable Memory is recognized. Displaying
files. Are you sure?" may appear. Select [

Yes

] to display the removable memory screen.

Displays the Removable Memory screen.

Store the document.

Select the folder where the file will be stored > [

Open

The machine will display the top 3 folder levels, including the root folder.

Select [

Store File

Set the type of original, file format, etc., as desired.

For the features that can be set, refer to the following:

Check the storing image.

NOTE

The maximum number of the storable files is 1,000.

Loading Originals (page 5-2)

NOTE

If the message does not appear, select [

Removable Memory

] on the Home screen.

Removable Memory (Store File, Printing Documents) (page 6-14)

Summary of Contents for TASKalfa 3011i
































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands

Kyocera TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands