8-28
Setup and Registration (System Menu) > System Menu
Manual Staple
[
System Menu/Counter
] key > [
Common Settings
] > [
Manual Staple
]
Offset Documents by Job
[
System Menu/Counter
] key > [
Common Settings
] > [
Offset Documents by Job
]
Storing Jobs
Bates Stamp
Select whether to print a bates stamp on all storing jobs.
Value
: Off, On
NOTE
When [
On
] is selected, the Bates Stamp settings cannot be changed when storing.
Edit Bates Stamp
Set the default Bates Stamp.
Value
: Date, User Name, Serial Number, Numbering, Text 1, Text 2, Date Format,
Numbering Default, Position, Font
NOTE
To set [
Text 1
] or [
Text 2
], select [
Change
] below and enter a maximum of 32
characters for the text string.
To set [
Date
], select [
Date Format
] and set the date display format.
To set [
Numbering
], select [
Numbering Default
] and set the starting sequence
number (1 to 9999999). If you select [
Fixed Digit Number
] > [
On
], you can set the
number of digits of the serial number (1 to 7 digits).
Select [
Detail
] in "Position" to specify the detailed stamp position using numeric
values.
NOTE
Only displayed when the optional 3,000-Sheet Finisher is installed.
Item
Description
Manual Staple
Select whether to use Manual Staple.
Value
: Off, On
NOTE
If you selected [
On
], set the time until manual stapling mode is automatically
cancelled. The setting range is 5 to 60 seconds (in 5-second increments).
Staple Position
Set the default Staple Position.
Value
: A4, Letter
Item
Description
Offset Documents by Job
Select whether to offset documents by Job.
Value
: Off, On
NOTE
This function is displayed when an optional Document Finisher is installed.
Item
Description
Summary of Contents for TASKalfa 3212i
Page 1: ...PRINT COPY SCAN FAX 3212i 4012i OPERATION GUIDE ...
Page 612: ...Index 10 Index Z Zoom 6 33 Default 8 19 ...
Page 613: ......
Page 616: ...First edition 2017 11 2V6KDEN200 ...
