Kyocera TASKalfa 3212i Operation Manual Download

Page: 478 / 616

9-48

User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting

Print Accounting Report

The total pages counted of all relevant accounts can be printed as an accounting report.

Reports have different formats depending on how the count of copiers and printers is administered.

When "Individual" is selected for Managing the Copy/Printer Count.

Use the procedure below to print a job accounting report.

Prepare paper.

Check that A4 or Letter paper is loaded in the cassette.

Display the screen.

[

System Menu/Counter

] key > [

User Login/Job Accounting

] > [

Job Accounting Settings

]

Print the report.

[

Print Accounting Report

] > [

Yes

]

Accounting report is printed.

NOTE

If the login user name entry screen appears during operations, enter a login user name and
password, and select [

Login

]. For this, you need to login with administrator privileges.

The factory default login user name and login password are set as shown below.

ACCOUNT. REPORT

Model Name

Login User Name

Login Password

3212i

3200

4012i

4000

Summary of Contents for TASKalfa 3212i









































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3212i

Reviews:

Related manuals for TASKalfa 3212i

Brands by name

Popular brands

Kyocera TASKalfa 3212i, Operation Manual

Search results

Summary of Contents for TASKalfa 3212i

Reviews:

Related manuals for TASKalfa 3212i

Brands by name

Popular brands