manualshive.com logo in svg

Kyocera TASKalfa 3212i, Operation Manual

The Kyocera TASKalfa 3212i brings seamless productivity to your office. Our Quick Manual provides step-by-step instructions for setup and operation, making it easy to get started. Download the manual for free from 88.208.23.73:8080 and unlock the full potential of this high-performance multifunction printer.

Share
Download
background image

1-13

Legal and Safety Information > Notice

GPL/LGPL

This product contains GPL (http://www.gnu.org/licenses/gpl.html) and/or LGPL (http://www.gnu.org/licenses/lgpl.html) 
software as part of its firmware. You can get the source code, and you are permitted to copy, redistribute and modify it 
under the terms of GPL/LGPL. For further information including availability of the source code, visit 
http://www.kyoceradocumentsolutions.com/gpl/.

OpenSSL License

Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:

1.  Redistributions of source code must retain the above copyright notice, this list of conditions and the following 

disclaimer. 

2.  Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following 

disclaimer in the documentation and/or other materials provided with the distribution.

3.  All advertising materials mentioning features or use of this software must display the following acknowledgment: 

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. 
(http://www.openssl.org/)"

4.  The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived 

from this software without prior written permission.
For written permission, please contact openssl-core@openssl.org.

5.  Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without 

prior written permission of the OpenSSL Project.

6.  Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software 

developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR 
ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so 
as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The 
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the 
SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the 
holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the 
package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:

Summary of Contents for TASKalfa 3212i









































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for TASKalfa 3212i

Xerox AS/400 Installation And Setup Manual preview
AS/400
Brand: Xerox Pages: 23
IBM 6400 Series Operator'S Manual preview
6400 Series
Brand: IBM Pages: 113
IBM 6400 Series Owner'S Manual preview
6400 Series
Brand: IBM Pages: 16
IBM 6400 Series User Manual preview
6400 Series
Brand: IBM Pages: 214
Oce COLOR SYSTEM 110 Operator'S Manual preview
COLOR SYSTEM 110
Brand: Oce Pages: 392
IBM INFOPRINT HI-LITE COLOR 4005-HC2 Upgrade Manual preview
INFOPRINT HI-LITE COLOR 4005-HC2
Brand: IBM Pages: 10
Kyocera 5003i Operation Manual preview
5003i
Brand: Kyocera Pages: 708
Xerox 490ST - Document Centre B/W Laser Printer System Administration Manual preview
490ST - Document Centre B/W Laser Printer
Brand: Xerox Pages: 322
Ricoh SP C222DN Administration Manual preview
SP C222DN
Brand: Ricoh Pages: 284
TVS electronics CHAMPION MSP 450 User Manual preview
CHAMPION MSP 450
Brand: TVS electronics Pages: 92
Oce im3512 Operation Manual preview
im3512
Brand: Oce Pages: 196
Philips SFF 6135hfd User Manual preview
SFF 6135hfd
Brand: Philips Pages: 82
Philips SFF 6135D User Manual preview
SFF 6135D
Brand: Philips Pages: 88
Philips SFF 6170dw User Manual preview
SFF 6170dw
Brand: Philips Pages: 90
Ricoh 161 Function Manual preview
161
Brand: Ricoh Pages: 192
Argox O4 Series Installation Manual preview
O4 Series
Brand: Argox Pages: 2
The Handy 10367 User Manual preview
10367
Brand: The Handy Pages: 12
Xerox WorkCentre 5790 Family Service Manual preview
WorkCentre 5790 Family
Brand: Xerox Pages: 143

Brands by name

Popular brands

Load more brands