background image

10-37

Troubleshooting > Troubleshooting

S

Removable memory 
error.

*1

An error occurred in the removable 
memory. The job stopped. Select 
[

End

].

The possible error codes and their 
descriptions are as follows.
01: The amount of data that can be 
saved at once has been exceeded. 
Restart the system or turn the 
power OFF/ON. If the error still 
occurs, divide the file into smaller 
files.
 If the error still occurs, the 
removable memory is not 
compatible with the machine. Use 
the removable memory formatted 
by this machine. 
If the removable memory cannot be 
formatted, it is damaged. Connect a 
compatible removable memory.

page 5-63

Removable Memory is 
full.

*1

The job is canceled. Select [

End

].

Insufficient free space in the 
removable memory. Delete 
unneeded files.

Remove originals in the 
document processor.

Are there any originals left in the 
document processor?

Remove originals from the 
document processor.

Replace all originals and 
press [Continue].

Remove originals from the 
document processor, put them back 
in their original order, and place 
them again. Select [

Continue

] to 

resume printing. Select [

Cancel

] to 

cancel the job.

Replace the waste toner 
box.

Is the waste toner box full?

Replace the waste toner box.

page 10-7

Running security 
function...

Running security function. Please 
wait.

*1 When Auto Error Clear is set to [

On

], processing resumes automatically after a set amount of time elapses. For details 

on Auto Error Clear, refer to the following:

Auto Error Clear (page 8-53)

Message

Checkpoints

Corrective Actions

Reference 

Page

Scanner memory is 
full.

*1

Scanning cannot be performed due 
to insufficient memory of the 
scanner. Follow the instructions on 
the screen.

Send Error.

*1

An error has occurred during 
transmission. The job is canceled. 
Select [

End

]. Refer to Responding 

to Send Error for the error code and 
corrective actions.

page 10-40

Message

Checkpoints

Corrective Actions

Reference 

Page

Summary of Contents for TASKalfa 356ci























































































































































































































































































































































































































































































































































































Reviews: