Kyocera TASKalfa 4002i Operation Manual Download

Page: 199 / 662

4-18

Printing from PC > Printing Data Saved in the Printer

Printing Data Saved in the Printer

You can save the print job into the Job Box of this device and print it as necessary.

If you configure settings in the [

Job

] tab of the printer driver and then print, the print job will be saved in the Job Box

(memory) and printing can be executed at the machine.

Follow the work flow below when using Job Box.

Specifying the Job Box from a computer and sending the print job. (

page 4-18

)

Using the operation panel to specify a file within a Box and printing it.

You can print the documents from the following boxes.

Printing Documents from Private Print Box (page 4-19)

Printing Document from Stored Job Box (page 4-20)

Printing Document from Quick Copy Box (page 4-21)

Printing Document from Proof and Hold Box (page 4-22)

Specifying the Job Box from a Computer and Storing

the Job

Click [File] and select [Print] in the application.

The Print dialog box displays.

Select the machine from the "Name" menu.

Click the [Properties] button.

The Properties dialog box displays.

Click the [Job] tab and select the [Job storage (e-MPS)] check

box to set the function.

NOTE

For information on how to use the printer driver software, refer to the following:

Printer Driver User Guide

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands

Kyocera TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands