2KR/2KS
1-3-6
(3) Contents of the maintenance mode items
Maintenance
item No.
Description
U000
Outputting an own-status report
Description
Outputs lists of the current settings of the maintenance items, and paper jam and service call occurrences.
Outputs the event log or service status page. Also sends output data to the USB memory.
Printing a report is disabled either when a job is remaining in the buffer or when [Pause All Print Jobs] is
pressed to halt printing.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences. Before initial-
izing or replacing the backup RAM, output a list of the current settings of the maintenance items to reenter the
settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output.
3. Press the start key. The interrupt print mode is entered and a list is output.
When A4/Letter paper is available, a report of this size is output. If not, specify the paper feed location.
When output is complete, the screen for selecting an item is displayed.
The output status is displayed.
Method: Send to the USB memory
1. Press the power key on the operation panel, and after verifying the main power indicator has gone off,
switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [TEXT] or [HTML].
8. Press the start key.
Output will be sent to the USB memory.
Display
Output list
MAINTENANCE
List of the current settings of the maintenance modes
USER STATUS
Outputs the user status page
SERVICE STATUS
Outputs the service status page
EVENT
Outputs the event log
NETWORK STATUS
Outputs the network status page
ALL
Outputs the all reports
Display
Description
READY
Standing by for output (including while outputting other reports)
ACTIVE
Performing output processing
COMPLETE
Output processing completed normally
ERROR
Output processing terminated with an error
Display
Output list
Outputs the report
To USB (TEXT)
Sends output data to the USB memory (text type)
To USB (HTML)
Sends output data to the USB memory (HTML type)
Summary of Contents for TASKalfa 420i
