![background image](http://html1.mh-extra.com/html/kyocera/taskalfa-620/taskalfa-620_service-manual_2015981118.webp)
2KN/2KP-1
1-3-80
U403
Adjusting margins for scanning an original on the contact glass
Description
Adjusts margins for scanning the original on the platen.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be adjusted.
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the cursor up/down keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
Figure 1-3-17
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display
Description
Setting
range
Initial
setting
Change in
value per step
A MARGIN
Scanner left margin
0.0 to 10.0
0
0.1 mm
B MARGIN
Scanner leading edge margin
0.0 to 10.0
0
0.1 mm
C MARGIN
Scanner right margin
0.0 to 10.0
0
0.1 mm
D MARGIN
Scanner trailing edge margin
0.0 to 10.0
0
0.1 mm
Scanner leading edge margin
(3.0±2.5 mm)
Scanner
left margin
(3.0±2.0 mm)
Scanner
right margin
(3.0±2.0 mm)
Scanner trailing edge margin
(3.0±2.5 mm)
U403
U404
(P.1-3-81)
Summary of Contents for TASKalfa 620
