![background image](http://html1.mh-extra.com/html/kyocera/taskalfa-620/taskalfa-620_service-manual_2015981201.webp)
2KN/2KP
1-4-57
(16) Fusing is poor.
(17) Image is out of focus.
(18) Image center does not align with the original center.
(19) Image is not square.
Copy example
Causes
Check procedures/corrective measures
Wrong paper.
Check if the paper meets specifications. Also check if the
specifying the paper type of machine default is proper (see
page 1-3-101).
Defective pressure nuts.
Tighten the fuser pressure nuts.
Flawed heat roller or press roller.
Replace the heat roller or press roller (see pages 1-5-70 or
60).
Defective fuser heater.
Replace the fuser heater (see page 1-5-66).
Copy example
Causes
Check procedures/corrective measures
Defective image scanning unit.
Replace the image scanning unit (see page 1-5-39).
Drum condensation.
Clean the drum.
Copy example
Causes
Check procedures/corrective measures
Misadjusted center line of image print-
ing.
Readjust the center line of image printing (see page 1-3-
15).
Misadjusted scanner center line.
Readjust the scanner center line (see page 1-3-27).
Original placed incorrectly.
Place the original correctly.
Copy example
Causes
Check procedures/corrective measures
Laser scanner unit positioned incor-
rectly.
Adjust the installation position of the laser scanner unit (see
page 1-5-42).
Image scanning unit positioned incor-
rectly.
Adjust the installation position of the image scanning unit
(see page 1-5-43).
Summary of Contents for TASKalfa 620
