![background image](http://html1.mh-extra.com/html/kyocera/taskalfa-620/taskalfa-620_service-manual_2015981055.webp)
2KN/2KP
1-3-17
U035
Setting the printing area for folio paper
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Method
Press the start key. The setting screen is displayed.
Setting
1. Select the item to be set. The selected item is displayed in reverse.
2. Change the setting value using the cursor up/down keys.
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U037
Checking the operation of the fan motors
Description
Drives the fan motors.
Description
To check the operation of the fan motors.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to operate. The selected item is displayed in reverse and starts driving the fan motor.
3. To stop the motor, press the stop/clear key.
Completion
Press the stop/clear key when the motor stops. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display
Setting
Setting range
Initial setting
LENGTH DATA
Length
330 to 356 (mm)
330
WIDTH DATA
Width
200 to 220 (mm)
210
Display
Operation
FEED SHIFT FAN
The feedshift fan motor (FSFM) is turned ON.
DLP FAN R
The developing duct fan motor (DEVDFM) is turned ON.
DLP FAN F
Developing fan motor 1 (DEVFM1) and 2 (DEVFM2) are turned ON.
COOLING FAN
Cooling fan motor 1 (CFM1), cooling fan motor 2 (CFM2), cooling fan
motor 3 (CFM3), cooling fan motor 4 (CFM4), PWB fan motor 1
(PWBFM1) and PWB fan motor 2 (PWBFM2) are turned ON.
DUP FAN
The duplex fan motor (DUPFM) is turned ON.
IMAGE FAN
The image formation fan motor (IFFM) is turned ON.
LSU FAN
The LSU fan motor (LSUFM) is turned ON.
LAMP FAN
The lamp fan motor (LFM) is turned ON.
Summary of Contents for TASKalfa 620
