![background image](http://html1.mh-extra.com/html/kyocera/taskalfa-620/taskalfa-620_service-manual_2015981078.webp)
2KN/2KP
1-3-40
U099
Adjusting original size detection
Description
Checks the operation of the original size detection sensor and sets the sensing threshold value.
Purpose
To adjust the sensitiveness of the sensor and size judgement time if the original size detection sensor mal-
functions frequently due to incident light or the like.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select an item and press the start key. The screen for executing each item is displayed.
Method to display the data for the sensor
1. Press the start key. The detection sensor transmission data is displayed.
2. To return to the screen for selecting an item, press the stop/clear key.
Setting
1. Select an item to be set.
*Time from activation of the original detection switch (ODSW) to original size judgment
Method to set the original size judgment time
1. Adjust the preset value using the * or # keys.
A larger value increases the original size judgment time, and a smaller value decreases it.
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for maintenance item No. is dis-
played.
Maintenance
item No.
Description
Display
Description
DATA
Displaying detection sensor transmission data
B/W LEVEL
Setting detection sensor threshold value
Setting original size judgment time
Display
Description
TAIL EDGE POSI
Detected original trailing position
ORIGINAL AREA
Original size detection
SIZE
Detected original size
Display
Setting
Setting
range
Default
setting
ORIGINAL
Original threshold value
0 to 255
72
LIGHT SOURCE
Light source threshold value
0 to 255
72
WAIT TIME
Original size judgment time*
0 to 255
150
A4R AREA
Original size detection position display (mm)
220/240
240
Summary of Contents for TASKalfa 620
