2KN/2KP
1-3-44
U110
Checking the drum count
Description
Displays the drum counts for checking.
Purpose
To check the drum status.
Method
Press the start key. The current drum counts and total drum counts are displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U111
Checking/clearing the drum drive time
Description
Displays the drum drive time for checking, clearing or changing a figure, which is used as a reference when
correcting the high voltage based on time.
Purpose
To check the drum status. Also used to clear the drive time after replacing the drum.
Method
Press the start key. The drum drive time is displayed.
Clearing
1. Press the reset key.
2. Press the start key. The drive time is cleared, and the screen for selecting a maintenance item No. is dis-
played.
Setting
1. Enter a five-digit drive time using the numeric keys.
2. Press the start key. The drive time is set, and the screen for selecting a maintenance item No. is dis-
played.
Completion
To exit the maintenance mode without changing the drive time, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
U127
Checking/clearing the transfer count
Description
Displays the counts of the transfer counter for checking or clearing.
Purpose
To check the count after replacement of the transfer unit.
To clear the counter value when replacing the transfer belt.
Method
Press the start key. The current counts of the transfer counter is displayed.
Clearing
1. Press the reset key and press the start key. The count is cleared.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item No. is displayed.
Maintenance
item No.
Description
Summary of Contents for TASKalfa 620
