background image

7-10

Managing Jobs > Confirmation Screen of Destinations

Confirmation Screen of Destinations

When selecting [

On

] for Dest. Check before Send, the confirmation screen of destinations appears after pressing the 

[

Start

] key. 

Machine’s 

Operation Guide

Follow the steps below to confirm the destinations.

1

Check all destinations.

Select [

] or [

] to confirm every destination. Select [

] to display the detailed information 

on the selected destination.

2

Change a destination.

Delete a destination

1

To delete the destination, select the destination you want to delete and select [

]. 

2

Select [

Yes

].

 

The destination is deleted.

Add a destination

To add the destination, select [

Cancel

] and then return to the destination screen.

3

Select [Check].

When you have finished checking all destinations, select [

Check

].

4

Press the [Start] key.

Start sending.

NOTE

Be sure to confirm every destination by displaying them on the touch panel. You cannot 
select [

Check

] unless you have confirmed every destination.

Destinations Check

10:10

Check the destinations and press [Check].

Menu

1/2

123

3333

44444

99999

Cancel

Check

123

3333

44444

99999

2

1

Summary of Contents for Triumph-Adler 302ci






























































































































































































Reviews: