2
1. Safety Precautions
■
Introduction
When used with a dresser manufactured by KYOKUTOH, this chip collector will
efficiently collect the chips that are generated during dresser operation.
It cannot be attached to any dressers other than the specified models.
Please do not use for any purpose other than described in this manual.
We are not be able to take a responsibility for any damage or injury caused by
results other than specified in this manual.
■
Regarding Signs
It indicates contents informing possibilities of death or
serious injury in case of incorrect handling.
It indicates contents informing possibilities of injury due
to handling error or occurrence of material damages.
This symbol indicates operations that should not be done.
This symbol indicates operation that should be done.
■
Recommended Air Pressure
Pneumatic pressure in the range of 0.45 to 0.55 MPa to use.
Use beyond the range may cause malfunction.
■
Recommended Facility
Check the usage environment before the installation.
Supply oil-free compressed air by using an oil mist separator or etc.
If the air contains oil, dressed chips may not be swallowed properly.
■
Before Installing
Do not use pipes with different diameters or other fittings (ex.
Replacing with speed controller).
The performance may decrease if different parts are used.
Check the pipe diameter of input side.
The product is designed to use
φ
10 hose (outer diameter).
