The point of maintenance
The point of maintenance
The point of maintenance
The point of maintenance
1. Confirm whether the machine is fixed on the stand tightly.
2. Check air pipe condition.
3. Remove spatter which is stuck with the remover.
4. Make sure that the magazine is fixed to the adapter tightly.
4.1 Procedure for changing the magazine
4.1 Procedure for changing the magazine
4.1 Procedure for changing the magazine
4.1 Procedure for changing the magazine
1. Cut off the air supply.
2. Set the Purge dial to [UNLOCK].
3. Pull a magazine out from magazine adapter by both hands.
（Please Not to damage the proximity sensor）
4. Please put a spare magazine into the magazine adapter
5. Set the Purge dial to [LOCK].
6. Confirm the magazine is fixed tightly.
7. Check the signal of the proximity sensor(option) if purchesed.
4.0
4.0
4.0
4.0
Maintenance
Maintenance
Maintenance
Maintenance
Set the purge dial to UNLOCK
Pull the magazine out from
Push a spare magazine into adapter
and turn purge dial left to LOCK
11 ページ
Summary of Contents for KIKK-EL
Page 2: ...2...
Page 7: ...7...
Page 9: ...3 2 Dimention 3 2 Dimention 3 2 Dimention 3 2 Dimention 9...
