— 8 —
8
5-2. Other functions
K-type thermocouple measurement
Plug a K-type thermocouple into the connector for thermocouple, and press
the function button to select
TC
function. Measured values using a
thermocouple are displayed on the sub display.
Alarm function
Red backlight blinks when a measured value exceeds or falls behind the values
which are set on HAL and LAL functions. On both functions, it is possible to enable
or disable the buzzer sound.
HOLD function
The measured value is held and being displayed for 6 seconds after
releasing the trigger.
Low battery warning
Battery mark appears when the battery voltage becomes low.
