6.11
KEW6305
File No.
6.4 Saving data (instantaneous values)
Pressing the
SAVE
key on
W
range during a measurement saves all the measured parameters at the
instant of saving. This is a manual single step operation.
Data can be saved to either below two locations:
* SD card
: Max. 511 files can be saved.
* Internal memory
: Max. 4 files can be saved.
Data is saved to a SD card automatically when a SD card has been inserted. If a SD card has not been
inserted, data is automatically saved to internal memory.
6.4.1 Saving Procedure
1
Press the
SAVE
key whilst on the
W
range .
2
The File number screen appears and the instantaneous measured data is saved.
(A file number is assigned automatically.)
3
On the measurement screen, it can be seen that a file is open.
〈
SD card
〉
lights up
〈
Internal memory
〉
lights up
File number
screen
Measurement
screen
4
Subsequent measured data can be saved by pressing the
SAVE
key with a file already opened.
5
Closing a file.
On completion of the data gathering, the file has to be closed.
Set the Function switch to
any range
other than “OFF” and
W
.(eg.
WIRING CHECK
)
www.
GlobalTestSupply
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
