20
(2) Date Setting
Date is displayed in the following order: Month/ Day/ Year.
Put the cursor on Date and press the
Key to display the Date
Setting Screen (Fig.23).
Select a parameter to be changed with the Cursor Key, and press
the
Key. Then the selected digit is highlighted and ready to be
changed. (Fig.24)
Press the Right Cursor Key
to increase numbers and the Left Cursor
Key
to reduce numbers. Keep the Cursor Key pressed down to change
numbers quickly. Press the
Key to confirm a number.
Repeat this procedure to change the other digits. Pressing the
Key
when settings are done returns to the Time/Date Setting Screen (Fig.25).
Press the
Key again to exit from the setting mode and return to the
CONFIG̲SETTING Screen. Then the clock starts.
Note) The second is not displayed on the Main Screen; only hours and
minutes are displayed.
Note) The backup battery may be exhausted when clock becomes wrong
after powering on/off the instrument. In this case, please contact
our local distributor. The life time of the backup battery is approx 5
years.
Fig.
23
Fig.
24
Fig.
25
