HOW TO USE
Remove all packaging materials from the Water Dispenser. Completely
untangle or unwind the power cable of the unit.
Before initial use, the Water Dispenser must be plugged into a wall
receptacle that is properly installed and grounded to reduce risk of
electric shock.
Allow about 1 liter of water to run out from the dispenser when using for
the first time.
Tear the label or any sealing material on the cover of the bottle.
Vertically insert the bottle supporter on top of the machine. Do not plug
in cord or turn the unit ON until water runs out from the hot water tap.
Cooling of water from the Water Dispenser normally takes about 3
minutes after the unit has been turned ON and the cooling switch has
been activated.
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Water coming out
from the hot and cold
dispenser is lukewarm
1.
Water from the hot and
cold container has
already been consumed
2.
No power supply
1.
Wait for about three minutes
to allow cooling or heating of
water from the unit
2.
Check if the power cord is
properly plugged into the
power supply
No water coming out
from the dispenser
1.
The water bottle is
empty
2.
Inlet of bottle
supporter is blocked
1.
Replace with another bottle
of water.
2.
Remove object that was
blocking the water flow
Water leaks coming
out from the bottle
supporter
The water bottle is
broken
Replace with a new bottle of
water
Too much noise when
dispensing water from
the unit
Water Dispenser is tilted
or not installed properly
Place unit upon a flat area and
stable surface
CLEAN AND CARE
Wash Bottle Supporter and Water Tank regularly to maintain optimum
performance of the Water Dispenser.
Do not use harsh cleaning agents or abrasive objects (e.g. scrubbing pads
or metal brushes) for cleaning.
Put back parts and accessories of the Water Dispenser to their proper
places before operating again.
Wipe dry all parts of the Water Dispenser using a soft and dry cloth.
SERVICE
Do not operate your KYOWA Water Dispenser if the unit malfunctions or
appears damaged in any manner. Bring the complete product to the place
of purchase or to any authorized KYOWA dealers for inspection, repair or
replacement.
Do not disassemble your KYOWA Water Dispenser by yourself. No user
serviceable parts inside. Refer all needed repair to an authorized KYOWA
service facility ONLY.
3
4
