5
6
STEAM
1.
Press Steam key; default setting and screen display for
steam function is P5, and cycles down to P3 – power is
locked and may not be adjusted.
2.
Adjust countdown timer time as needed. (see Countdown
Timer setup for instructions)
TROUBLESHOOTING
PROBLEM ENCOUNTERED
WHAT TO CHECK
No light appears after
pressing ON/OFF switch.
Check connection of plug to outlet if loose
Check condition of switch, socket, and power
cable if in good condition
Does not produce heat even
after the unit beeps and
indicator light is ON.
Check if pan used is acceptable (note: not all
classified as stainless pot/pan is suitable to the
Induction Cooker)
Check if pan is placed at the center of the panel
Check if bottom of pan complies in acceptable
size and appearance that can be recognize by
Induction Cooker.
Sudden stoppage while in
use.
Check if there is source of high temperature in
the surrounding of Induction Cooker.
Check if air inlet and outlet is blocked
Check if set time is reached.
Check if monitor display error which means that
system protection functions.
No light appears after
pressing ON/OFF switch.
Check connection of plug to outlet if loose
Check condition of switch, socket, and power
cable if in good condition
ERROR DISPLAYS
E0:
The Induction Cooker cannot sense the pan/or no pan is placed on top
of plate /or using not acceptable pan.
E2:
The surface of Induction Cooker is too high. An alarm will sound, and
the Induction Cooker will not shut down after 2 minutes
E3:
Power voltage exceeds 275V. An alarm will sound, and the Induction
Cooker will not function at this stage.
E4:
Power voltage is lower than 100V. An alarm will sound, and the
Induction Cooker will not function at this stage.
E5:
Open circuit of surface sensor. An alarm will sound, and the Induction
Cooker will not function at this stage
E6:
The IGBT (Transistor) is short circuited or has open circuit. An alarm will
sound, and the Induction Cooker will not function at this stage.
CYCLE TIME SETTINGS FOR FUNCTION KEYS
FUNCTION
KEYS
POWER
(P)
CUT-OFF
FUNCTION TIME
CYCLES ON /
OFF
WARM KEY
P1
--
Yes
BOIL
P6
28 minutes
--
DEEP FRY
P6
--
Yes
SOUP
P5/P3/P2
1 hour 30 minutes
Yes
STEAM
P5/P3
1 hour
--
STIR FRY
P4
--
Yes
HOT POT
P4
2 hours
--
SAUTÉ
P6
--
Yes
INDUCTION COOKWARE GUIDE
ACCEPTABLE POTS AND PANS TO USE
PAN MATERIAL – made of iron metal / stainless steel containing magnetic
inducting material
PAN APPEARANCE AND SIZE – with smooth and even-finished bottom,
bottom diameter is 16 to 24 cm.
NOT ACCEPTABLE POTS AND PANS TO USE
PAN MATERIAL – non-iron metal, ceramic pot, glass, pans with copper and
aluminum material
PAN APPEARANCE AND SIZE – rough bottom pans; bottom diameter is less
than 16 cm
