98
Do not remove the SD card or do not turn OFF the WGA-910A.
Or, it may cause trouble.
In addition, the measurement cannot be conducted during saving.
The “
Error of saving the set values
” window appears when no SD card is inserted or the SD card does not
have enough free space.
Press the
key to get back to the “
Confirmation of saving the set values
” window.
6-5-5. SD CARD SETTING
(1) Set Value Save (Saving Setting Value)
Capable of saving the all setting values of the WGA-910A to the SD card and capable of checking them with the PC
software for the SD card.
The control output [SD] is turned ON while saving the setting values.
<How to operate>
1) Press the
key on the “
Initial Setting (1/2)
” window.
2) Press the
key on the “
Initial Setting (2/2)
” window.
3) Press the
key on the “
SD Card Setting (1/2)
”
window.
4) Press the
key on the “
Confirmation of saving the set
values
” window to start saving the setting values to the SD card.
Press the
key to get back to the previous window without
saving.
5) After starting the saving of the setting values, the “
Saving the set
values
” window appears.
The red flame blinks and the progress condition is displayed on the
progress bar while saving the setting value.
After the saving, the “
SD Card Set
” window appears again.
the calibration value are
1 / 2
read from SD card.
Set Value Read
View Wave File Name
Format
Next
The all datas saved in SD card
are deleted.(Quick format)
The wave file name saved in
SD card
is checked or deleted.
The all set values excluding
The all set values excluding
the calibration value are
saved to SD card.
SD Card Setting
Set Value Save
Return
Measure
Return
Measure
Initial Setting
The set value is read and
SD Card Setting
saved. The wave file is
viewed.
2 / 2
Previous
NOTE 1
NOTE 2
Blinks
set.
The operations of WGA-910A and
external device are checked.
System
Self-Check
Operation Check
Next
1 / 2
Initial Setting
The signal to select the num-
ber of measurement condition
is set.
Return
Measure
Meas.Select Signal
Key Operation
Self-check of WGA-910A is con-
ducted.The program version and
serial No.are displayed.
The initial sets on system are