100
After selecting the
key and if the following conditions happen, an error window appears.
To close the error windows, operate as follows.
About writing/reading the setting value to the SD card and reading the waveform data
Capable of writing the setting value to the SD card and capable of reading the setting value and waveform data
from the SD card with the PC software for the SD card.
Capable of converting the waveform data to the CSV file and displaying the waveform.
The PC software for the SD card Instruction Manual are included in the accessory CD-R.
1) The SD card is nor inserted to the slot or the SD card is still write-
protected even if the
key is pressed on the “
Waveform
”
window.
To close the error window, press the
key to get back to the
“
Waveform
” window.
Insert the SD card or release the write-protected mode.
2) After pressing the
key on the “
Waveform
” window or
while saving the waveform data after starting the waveform display,
the waveform files from No. 00001 to No. 21844 are all filled with
data.
To close the error window, press the
key to change
the window or remove the SD card from the slot.
3) The SD card is removed from the slot after starting the waveform
display.
To close the error window, press the
key and stop the
updating of the waveform display.
Then press the
key to change the window.
Insert the SD card to the slot again.
4) The free capacity of the SD card is not enough after pressing
the
key on the waveform display window.
To close the error window, press the
key to get back to the
waveform display window.
Then remove the SD card from the slot and increase the free capacity
by erasing the extra file, etc.
5) The free capacity of the SD card is not enough while saving the
waveform data.
Press the
key and stop updating the waveform display
to close the error window.
To close the error window, press the
key to
change the window or remove the SD card from the slot.
Then remove the SD card from the slot and increase the free
capacity by erasing the extra file, etc.
NOTE
10.0
S
X-axis
Stop
Set
kN
300.00
kN
SD Card Error
RECORD
-200.00
Switch
Cursor ON
Wave Clear
SD card is full of
wave files.
Y-axis
0.0
SD Card Error
Cursor ON
Wave Clear
RECORD
Set
Switch
Y-axis
10.0
S
X-axis
Stop
0.0
-200.00
300.00
kN
The writing cannot
be confirmed.
kN
-200.00
Switch
Cursor ON
Wave Clear
Set
kN
300.00
kN
SD Card Error
SD card does not
have empty capacity
Y-axis
RECORD
0.0
10.0
S
X-axis
Stop
RECORD
RECORD
RECORD
RECORD