118
The outputted measured value with the [GDT] command is different from the displayed value of the
WGA-910A according to the sensor output variation or setting value of the input setting
8-3-2. Reading
(6) [GDT]
Content
: Output the displayed value.
Format
: GDT x <CR>
Parameter
: x
For the [Block Peak-Bottom] and [Time Peak-Bottom]
0: Peak value (measured value 1) and bottom value (measured value 2) in
order.
1: Peak value (measured value 1)
2: Bottom value (measured value 2)
For the other operation modes
1: Current measuring value (measured value 1)
Return value format
: Dx±yyyyyy, zz<CR><LF>
Unit: 01 to 79
79 types
Refer to "12-2 UNIT LIST."
Measured value: -99999 to 99999(count)
Return value is an indicated value with a decimal point.
If the indicated value has no decimal point, it is filled
with “0” from the head.
Measured value 1 or measured value 2
Description and
others
: For the [Block Peak-Bottom] and [Time Peak-Bottom]
D1±yyyyyy, zz
D2±yyyyyy, zz
For the other operation modes
D1±yyyyyy, zz
Example) [Block Peak-Bottom] Return value when the peak value (measured value 1):
+999.99, bottom value (measured value 2): -125.56, unit: kN (03)
D1+999.99, 03<CR><LF>
D2-123.56, 03<CR><LF>
[Block-specified Bottom] Return value when the bottom value (measured value 1):
-99
D1-000099, 03<CR><LF>
[Normal Mode] Return value when the current measured value (measured value 1):
Larger (+OVER) than +999.99
D1+
OFL, 03<CR><LF>
The return value ±yyyyyy is the indicated value, including the decimal point.
When the value has no decimal point, it is filled with “0s” from the head.
Example
Suppose the current indicated value is
+
999.99. The return value is as follows.
D1+999.99<CR><LF>
Suppose the current indicated value is -99. The return value is as follows.
D1-000099<CR><LF>
Suppose the current indicated value is larger than +999.99.
The return value is as follows.
D1+
OFL<CR><LF>
NOTE