119
(7)[GST]
Content:
Read the status.
Format:
GST<CR>
Parameter
None
Return value format:
Sabcdefghi<CR><LF>
Description and others: Return value abcdefghi denotes the status with ‘1’ or ‘0.’
Numeric ‘1’ is output in the following state.
a: HH comparator is ON.
b: HI comparator is ON.
c: OK comparator is ON.
d: LO comparator is ON.
e: LL comparator is ON.
f: During measurement.
g: Detecting.
h: During holding.
i: Error
(8)[GOD]
Content:
Display the original value (sensor output value).
Format:
GOD<CR>
Parameter:
None
Return value format:
DO±x.xxxx<CR><LF>
Sensor output value: -3.2000 to 3.2000 (mV/V)
(9) [PRR]
Content:
Read the setting value.
Format:
PRRppp<CR>
Parameter
ppp
010: Sensitivity registering value
011: Numeric Value Registering Calibration value
012: Excitation voltage
020: Smoothing function
030: Additional value
041: Comparison setting
051: Compared value of the HH comparator
052: Compared value of the HI comparator
053: Compared value of the LO comparator
054: Compared value of the LL comparator
058: Measuring condition No.
070: Setting measuring mode
090: ZERO compensation function
100: Option
115: Keylock
130: Waveform display setting 1
131: Waveform display setting 2
150: Measuring condition selection signal
151: Backlight lightning time
152: Language
153: Clock
Return value format:
For details, see each command. (Excluding the options.)
000<CR><LF>
Option: None (WGA-910A-0)