131
Wave Display Setting
'Comparison'and 'Measure Mode'
setting are set as measure-
ment condition.
Input Setting
Meas.Cond.Setting
Next
Setting
Calibration is conducted with
sensor by 'Manual Input','TEDS
Auto'or'TEDS Part'Cal.
Measure
Calibration
'Smoothing','Additional Value'
and 'Zero Compensation'are set
The sensor output is monitored
1 / 2
The necessary setting to dis-
play the wave such as 'X-axis'
and 'Y-axis'are set.
Return
Measure
Register
Communication Speed
Now
New
19200bps
9600bps
2400bps
9600bps
4800bps
19200bps
Push the target key and 'Register'key.
8-4. OPERATION AND FUNCTION OF THE COM. SETTING (COMMUNICATION SETTING)
(1) Communication Speed
Sets the communication speed (baud rate) of the RS-232C and RS-485.
<Setting Range>
2400, 4800, 9600, 19200 (bps)
<How to operate>
1) Press the
key on the “
Measuring
” window.
2) Press the
key on the “
Setting (1/2)
” window.
3) Press the
key on the “
Setting (2/2)
” window.
4) Press the
key on the “
Option Setting
” window.
5) Press the
key on the “
Com. Setting
” window.
6) Press the target key and
key to register the target value.
Return
Measure
Com.Setting
The communication speed of RS-
Communication Speed
232C and RS-485 is set.
9600bps
It is only applied to RS-485.
Device ID
The ID of WGA-910A is set.
1
The transmission mode of com-
Transmission Mode
munication such as the oper-
ation by command is set.
Repeat.Output
Return
Measure
Option Setting
'Communication Speed','Trans-
Com.Setting
mission Mode'and 'Device ID'
of RS-232C/485 are set.
'Transmission Speed',logic of
BCD Output Setting
each output,and 'BCD Classifi-
cation are set.
'Zero Dsp.'(0V) or 'Full Dsp.'
D/A Output Setting
(10V),and 'D/A Classifica-
tion' are set.
'The Number of Occupied
CC-Link Setting
Stations','Transmission Speed'
and 'Station Number' are set.
Setting
'Meas.Select Signal'
'System', 'Self/Operation
Measure
Initial Setting
Option Setting
Previous
2 / 2
Check'and 'SD Card'
'Communication', 'BCD Output',
'DA Output'and 'CC-Link'
are set.
kN
LL
LO
HI
HH
OK
Block Peak-Bottom
Switch
- 150.00
- 999.99
HH
999.99
HI
500.00
LO
LL
Hold
Zero
Set
Detecting
Measure 1
Holding