11
2-1-3. Measuring Window (Waveform for other than the [Block Peak-Bottom] and [Time Peak-Bottom])
1)
Cursor ON
key
The “Cursor” window appears to display a cursor.
2)
Switch
key
Display changes in order from “Number” - “Zoom in number” - “Waveform”
by pressing the
Switch
key.
3)
Measured value
Displays a measured value with unit.
4)
Y axis end point
Displays the end point of the Y-axis that is set in the “Y-axis setting” of the
“Waveform display setting.”
5)
Y-axis
key
Opens the “
Y-axis setting
” window of the “Waveform display setting.”
6)
Y axis start point
Displays the start point of the Y-axis that is set in the “Y-axis setting” of the
“Waveform display setting.”
7)
RECORD
key
Starts recording waveform data while displaying waveforms.
After recording waveform data for 1 window, the WGA-910A saves the data in
the SD card.
8)
Wave Clear
key
Clears the current displaying waveform.
9)
Set
key
Opens the setting menu window.
10)
Start
key/
Stop
key
Press the Start key to start the waveform displaying according to the preset
condition in the "Waveform display setting".
After pressing the Start key, it changes to Stop key.
Press the Stop key to stop the waveform display.
11) X axis end point
Displays the end point of the X-axis that is set in the “X-axis setting” of the
“Waveform display setting.”
12)
X-axis
key
Opens the “
X-axis setting
” window of the “Waveform display setting.”
The
X-axis
key is displayed in gray and key operation is invalid during
displaying the waveform.
The key operation becomes valid before displaying the waveform or after
clearing it.
10.0
S
kN
Set
Wave Clear
Start
0.0
-200.00
300.00
kN
Cursor ON
Y-axis
X-axis
Switch
RECORD
8)
9)
10)
11)
12)
1)
2)
3)
4)
5)
6)
7)