32
4-3. BASIC OPERATION OF SETTING
Setting windows appear as follows.
1) Press the
key on the “
Measuring
” window.
2) Press the target main item key on the “
Setting
” window.
3) Press the target item key on the main item window.
4) Press the target key and
key on the item window.
5) Press the target function key on the item window.
6) If parameter exists, press the target parameter key, input a setting
value and press the
key.
Calibration
'Bridge Voltage','No-Load Zero
,'Sens.Regist.Cal'or'Actual
Load Cal'and 'Unit'are set.
Return
Measure
Manual Input Cal.
Next
1 / 2
TEDS Auto Cal.
TEDS Part Cal.
TEDS Ope.Setting
'TEDS Read Ope.'and 'Zero dur-
ing TEDS'are set.TEDS informa-
tions are displayed.
Calibration is automatically
conducted with all reading
from TEDS built-in sensor.
Calibration is conducted with
the only selected item from
TEDS built-in sensor.
Main item key
Item keys
Target key
Function key
Parameter key