62
Classifications for the control outputs, keys, and setting values are fixed.
<Direct operations from the “
Measuring
” window>
1) Press any of the
key on the
“
Measuring
” window.
2) The window changes to the setting window of the target compared
values.
Input a setting value with the numeric keyboard and press the
key for registering.
<Classifications of comparators for the [Block Peak-Bottom] and [Time Peak-Bottom]>
For the [Block Peak-Bottom] and [Time Peak-Bottom], control outputs and setting values of every comparator are
classified as follows.
Classification
Control Output
Keys and setting values
Upper limit of the peal value
HH comparator
HI1 Compared Value
Lower limit of the peak value
LL comparator
LO1 Compared Value
Upper limit of the bottom value
HI comparator
HI2 Compared Value
Lower limit of the bottom value
LO comparator
LO2 Compared Value
(2) Hysteresis Width
Common to all comparators. Sets a width between the comparator’s ON and OFF.
<Setting Range>
0 to 9999 (count)
<How to operate>
1) Press the
key on the “
Comparison Setting (1/2)
” window.
2) Press the
key on the “
Comparison Setting (2/2)
”
window.
3) Input a setting value with the numeric keyboard and press the
key for registering.
NOTE
