79
The
key is displayed in gray and the X-axis setting cannot be changed when displaying the waveform.
For changing the X-axis setting, press the
key and clear the waveform on the “Waveform”
window.
6-4. WAVE DISPLAY SETTING (SETTING WAVEFORM DISPLAY)
6-4-1. Setting X-axis
Sets the end point of the time axis (= X-axis of the waveform).
Displays the waveform from the start (press the
key on the “
Waveform
” window) to the preset time of the
X-axis end point as one window.
Press the
key on the “
Waveform
” window. The “
X-axis Setting
” window appears directly.
<Setting Range>
End point:
0.5, 1.0, 2.0, 5.0, 10.0, 20.0, 50.0, 100.0 (sec)
<How to operate>
1) Press the
key on the “
Measuring
” window.
2) Press the
key on the “
Setting (1/2)
” window.
3) Press the
key on the “
Wave Display Setting (1/2)
”
window.
4) Press the
key to display the target value.
Press the target key and
key for registering.
<How to operate the X-axis directly from the “
Measuring
” window>
1) Press the
key on the “
Waveform
” window.
2) The “
X-axis Setting
” window appears.
Conduct setting as the above.
0.0
-200.00
300.00
kN
Cursor ON
Y-axis
X-axis
Switch
RECORD
10.0
S
kN
Set
Wave Clear
Start
1 / 2
The level that measured value
passes for satisfying trigger
condition is set.
Next
1000.00kN
Auto Mode
0.00kN
The start and end point of Y-
axis are set.
The mode to start the wave
display is set.
Y-axis Setting
Start Mode of Wave
Passed Level
Wave Display Setting
The end point of X-axis(time)
is set.
10.0sec
Return
Measure
X-axis Setting
NOTE
X-axis Setting
New
sec
2 / 2
10.0sec
Register
20.0sec
sec
Return
Measure
Push the target key and 'Register'key.
X-axis Setting
Now
End P.
10.0
50.0sec
100.0sec