86
It is not possible to shift to other “setting window” while locking
the key operation.
6-5-2. System
(1) Key Lock
Select lock (inhabit changing) or release.
The
key is invalid and displayed in gray in locked state.
The
key changes to the
key after the window gets back to the “
Measuring
” window.
Press the
key with the locked state. The window changes to the “
Key Lock
” window to release the
locked state.
<Setting Range>
Lock or Release
<Operations for key lock>
1) Press the
key on the “
Initial Setting
” window.
2) Press the
key on the “
System (1/2)
” window.
3) Press the
key and then
key to be locked.
In addition, the
key is invalid and displayed in gray.
4) Press the
key to get back to the “Measuring” window.
The
key changes to the
key.
In addition, other keys are invalid and displayed in gray.
<How to release the lock>
1) Press the
key on the “
Measuring
” window.
2) Press the
key and then
key for releasing.
System
The 'Lock'or 'Release'to
change the sets by key is se-
fault.
Input Set
lected.
Release
Each of the set values is re-
turned to reset to the de-
1 / 2
The time of turning on the
Return
Measure
Key Lock
Set Initialize
Backlight Time
backlight is set.
The indicated language is set.
Language
Next
0 min
English
set.
The operations of WGA-910A and
external device are checked.
System
Self-Check
Operation Check
Next
1 / 2
Initial Setting
The signal to select the num-
ber of measurement condition
is set.
Return
Measure
Meas.Select Signal
Key Operation
Self-check of WGA-910A is con-
ducted.The program version and
serial No.are displayed.
The initial sets on system are
NOTE