k c a - 영 문
47
Heating and Hot Water Pipe Construction
Do not add anti-freezing liquid to the heating
pipes.
This may shorten use life of the unit and cause
malfunctions.
After completely cleaning out the pipes, then
complete pipe construction.
Any contaminant inside the pipes may reduce the
heating and hot water efficiency as well as cause
malfunctions.
Any exposed pipes must be insulated with
insulation material.
There may be freezing during the winter months.
Since hot water cannot be used in case of supply
water pipe freezes and when there is insufficient water
inside the heating pipes, the water cannot be
replenished making normal operation of the boiler
impossible.
When
completing
the
pipe
connection
construction, it should be done after tightening
the boiler pipe adaptor with a tool such as a
spanner.
Do not use excessive force to connect the pipes or it
may cause a leak due to damages to the external
parts.
Distributor must be non-corrosive material.
Do not use aluminum, carbon steel pipes, and cast iron material since they are easily corroded.
6
