12
Preheat
Note: The print preheating parameters can be set in the slicing software, or in Tools-
＞
Preheat, and select Extrusion 1 or Hotbed to adjust those temperatures. For your
reference, the preheating standard of PLA filament: the nozzle temperature is 200
℃
and
the hotbed temperature is 50
℃
. You can directly choose the sliced model to print, or
choose the test model that comes with the storage card.
While waiting for the temperature to rise, you can place the filament on the filament
holder. For smoother printing, you can cut the end of the filament diagonally as shown
in the picture.
