3
Notes
1.
After unboxing, please check whether the machine is damaged, bent, or
scratched, and check the parts against your order. If you have any questions,
please promptly contact our after-sales service via the Kywoo 3D official website
or the email address provided on the manual.
2.
Do not use the printer for anything other than described herein in order to avoid
personal injury or property damage.
3.
Do not place the printer near any heat source or flammable or explosive objects.
We suggest placing it in a well-ventilated, low-dust environment.
4.
Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
5.
Please use the recommended filaments to avoid the blockage of the extruder and
damage to the machine.
6.
Do not use any other power cable except the one supplied. Always use a
grounded three-prong power outlet.
7.
Do not touch the nozzle or printing surface during operation as they may be hot.
Keep hands away from machine while in use to avoid burns or personal injury.
8.
Do not wear gloves or loose clothing when operating the printer. Such clothes
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
9.
After printing, use the provided tools to clean up any filament on the nozzle while
it’s still hot. Do not touch the nozzle directly with your hands.
10.
Clean the printer frequently. Always turn the power off when cleaning, and wipe
with a dry cloth to remove dust, adhered printing plastics or any other material
off the frame, guide rails and wheels. Use glass cleaner or isopropyl alcohol to
clean the print surface before every print for consistent results.
11.
Children under 10 years of age should not use the printer without supervision.
12.
This machine is equipped with a security protection mechanism. Do not manually
move the nozzle or printing platform while booting up, otherwise the device will
automatically power off for safety.
13.
Users shall comply with related national and regional laws, regulations and
ethical codes where the equipment or prints produced by it are used, and users
of our product shall not use aforesaid products to print any end-use products,
objects, parts or components or any other physical prints that violate the national
or regional laws, regulations and ethical codes where herein referred product
and produced prints by it is located.
