SKY899
Installation Manual
009-11900-001
Maintenance - Page 4-31
Revision F
July 18, 2013
4.9 DISPOSITION OF FAILED ITEMS
Return defective components to your authorized L-3 Avionics Systems dealer or to:
L-3 Communications Avionics Systems, Inc.
Attn: Customer Service
5353 52nd Street, S.E.
Grand Rapids, MI USA 49512
If available, pack components in their original shipping container. If the original container is not
available, pack them as follows:
CAUTION
Do not use desiccant crystals when packaging electronic assemblies.
Since the assembly must be packed tightly, crystals in bag form cannot
be used. The use of loose crystals may cause unnecessary damage
resulting in a cleaning problem.
1.
Ensure that nonconductive covers/caps are installed on the exposed terminals of cable connectors on
the display, TRC, and antenna.
2.
The display and TRC contain electrostatic discharge sensitive (ESDS) parts and must be wrapped in
static protective materials.
3.
Wrap with bubble pack. Secure bubble pack with reinforced tape.
4.
Place assembly in a cardboard box.
5.
Wrap any accessories in tissue and place in the box. Fill spaces with bubble pack.
6.
Put a letter on top of bubble pack. The letter must contain:
•
Your name, address, and telephone number.
•
Purchase order number.
•
Description of component including, when applicable, model and serial number.
•
Date of purchase.
•
A brief description of the difficulty.
•
Type of display and radar altimeter.
•
Copy of error log, if available.
7.
Shut box and seal with reinforced tape.
8.
Attach packing list to outside of box.
The document reference is online, please check the correspondence between the online documentation and the printed version.
