27
In-Fit Exercise Pools
Wi-Fi
This menu allows you to connect your
in.touch module to a Wi-Fi network or to
change its network.
To connect your in.touch module to a wire-
less network, slide the left wheel until the
desired menu icon is shown in the middle
screen or press on the menu name.
After a few seconds the available networks
will appear on the screen, as well as their
signal strength.
Slide Up or Down the list to select your
network.
If the Wi-Fi network is password protect-
ed enter it when prompted. Use Enter to
validate the password.
If no password is required the in.touch will
connect automatically.
Once the in.touch module is connected to a
Wi-Fi network a green check mark will
appear in the Wi-Fi menu, and the network
name will appear in the
Settings
menu.
