20
Electrical Systems
Using switches located on your console you can easily control all the functions for the lights,
electronics, heat and air. The electronics are accessible by controls located overhead.
Factory Installed Lights, Signals and Equipment
The information for care and maintenance for the factory installed components such as
the dashboard lights and gauges including horn, turn signals, headlights, fuses, circuits,
bulbs wiring etc. can be found in the chassis owner’s manual provided with your
unit.
It is recommended that a daily inspection of the headlights, turn signals, warning lights,
etc. be performed and any faulty items be replaced or repaired as needed.
Switch Panel
Depending on the option content in your unit you may find a variety of toggle switches,
indicator lights and the A/C Knobs, each is labeled as to its function.
Switches
To operate simply press the corresponding switch for the function desired.
Light Switch:
Activates the lights above the passenger’s seats. This will
activate the
overhead passenger lights and the fluorescent lights if both available.
Door Switch
: Activates the electric door controls, press once to open or close.
Heated Remote Mirrors
: Controls the heating function for the mirrors.
Passenger Door Defrost Feature
: The OEM rear defrost switch controls the defrost
feature on the passenger entry door.
Air Conditioning Control
A digital control is typically located in the front headliner panel.
Switch Panel Maintenance and Care
• A daily inspection of the interior lights, including reading lights, step well lights, entry
lights and any emergency lights should be completed.
•
Electric Door switch: Open and close the electric door with the inner switch as well as
the remote control. If the door is not moving correctly or the switch does not activate the
door check the Emergency Door release to make sure it is secured properly. If it is still
not working contact your local dealer.
•
Heat and or A/C controls: Turn on check each level of the switches to see that they
function properly when activated.
