5XT_RM_EN_1.0
w w w . l - a c o u s t i c s . c o m
7
4
SUBSET PROCEDURES
Attaching the ETR5 on the 5XT
PROCEDURE A
Tools
Electric screwdriver with torque selector.
T30 bit.
1.
Remove the screw from the insert on both sides of the enclosure.
Use a T30 bit.
2.
Slide the metal washers on the knobs in this order:
plain washer | Grower washer | plain washer.
3.
Attach the bracket to the enclosure.
a.
Position the bracket.
b.
On one side, slide the rubber washer between the bracket and the cabinet.
c.
Align the washer, the bracket slot and the insert, and start inserting the knob.
d.
Repeat the steps b. and c. on the other side of the enclosure.
4.
Set the bracket to its final position.
a.
Adjust the bracket angle and height.
b.
Tighten the knobs to secure the bracket.
