background image

Welcome

Intended use

This system is intended for use by trained personnel for professional applications.

Read the USER MANUAL before operating the system.

Use the loudspeaker system components described in the user manual and follow the operating instructions.

Do not expose the product to extreme conditions.

Do not expose the product to rain or sea spray.
Do not expose the product to moisture (mist, steam, humidity, condensation…) or excessive heat (direct sun,

radiator…) for a long period of time.

Symbols

The following symbols are used in this document:

This symbol indicates a potential risk of harm to an individual or damage to the product.
It can also notify the user about instructions that must be strictly followed to ensure safe installation or operation of

the product.
This symbol noties the user about instructions that must be strictly followed to ensure proper installation or

operation of the product.

This symbol noties the user about complementary information or optional instructions.

Welcome

Thank you for purchasing the L-Acoustics KARADOWNK2.
This document contains essential information on rigging the system properly.

As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to

change the specications of its products and the content of its document without prior notice.

 Please

check 

www.l-acoustics.com

 on a regular basis to download the latest document and software updates.

KARADOWNK2 rigging manual (EN) version 1.1 

 5

Summary of Contents for KARADOWNK2














Reviews: