Rigging a Kara downll array under a K2 array
Rigging a Kara downll array under a K2 array
Type of deployment
own array
Rigging accessories
KARADOWNK2
Min number of operators
2
Assembly
About this task
Reference rigging manuals
This procedure is complementary to the rigging instructions available in the main system rigging manuals.
Refer to the
K2 rigging manual
and the
Kara rigging manual
for more details.
Prerequisite
• Prepare and raise a K2 array.
• Prepare an array of three Kara with 0° inter-enclosure
angles.
• Position the Kara array under the K2 array.
Make sure the latches on the bottom K2 are in storage position.
Procedure
1.
Take out the four rigging arms on the top Kara enclosure.
a) Lock the front rigging arms in linking position.
8
KARADOWNK2 rigging manual (EN) version 1.1
